Preface:
This is the fourth edition of CSA Standard A82.31,
Gypsum Board Application and is written in SI (metric) units. It is part of the CSA A82 Series on Gypsum. and supersedes the third edition published in 1977. the second edition published in 1963. and the first edition published in 1954.
This Standard was prepared by the Technical Committee on Gypsum under the Jurisdiction of the Standards Steering Committee on Building Materials and Products and was formally approved by these Committees. It has been approved as a National Standard by the Standards Council of Canada.
Scope:
1.1
This Standard is intended to describe the minimum requirements for
(a) the application and finishing of gypsum board used in wall and ceiling construction (except gypsum board to receive plaster); and
(b) the Installation of framing to receive the above gypsum board.
1.2
Where a fire resistance rating Is required, the Installation, Including type and spacings of fasteners, shall be in accordance with the applicable fire test report and/or building code regulation or as provided for In Chapter 2 of Fire-Performance Ratings of the Supplement to
The National Building Code of Canada.
1.3
Where the requirements In this Standard are more stringent (size or thickness of framing, size and spacing of fasteners, etc) than the fire-rated construction, these requirements shall govern; otherwise, the construction described In the fire test report shall govern.
| Edition : | 4th |
| File Size : | 1
file
, 11 MB |
| Note : | This product is unavailable in Russia, Ukraine, Belarus |
| Number of Pages : | 46 |
| Product Code(s) : | 2424221, 2424221 |
| Published : | 12/01/1991 |
